Presenting the Nimo, the anytime,anywhere mixer. This revolutionary product is the only mixer which is permitted to transport concrete during daytime.

Zoom to the site!

This mixer is mountable on any truck with a wheelbase of 3200mm. This small mixer can move far quicker through the heavy traffic prevalent in cities.

Constant concreting!

Concrete on the go is a key factor today that has helped the RMC industry evolve. Transit mixers are the most visible among the range of 3 concreting equipment. But the common 6 m class Transit Mixers are not being allowed to ply inside city roads during the peak hours. It is because the Transit Mixers are offered on 16 tonner &higher capacity trucks which is classified as HCVs. 3 Schwing Stetter's Nimo, a 3 m .

Transit Mixers mounted on a 10 tonner truck (with 8.25 X 20 tyres) comes under the LCV category. Thus enables a continous concreting. Nimo is also ideal for delivering small loads of concrete to sites where it is not economically viable to send a larger mixer. The small size also means that it can enter narrower roads to deliver concrete. So if you want a quick moving mixer that can deliver concrete anywhere, anytime, the Nimo is the product for you. Contact us in the numbers/email Ids given below or contact your Schwing Stetter representative for further details.

Quality for all requirements

Stetter  truck mixers  are  the  result  of experience  gained  over decades  accompanied  by  permanent  advancement  and optimization. They incorporate the know-how  from a production of more than 60,000 truck mixers which have proved to be reliable concrete mixer all over the world. Stetter truck mixers are characterized by low-maintenance  technology in a modern design, simple handling, cost minimizing in maintenance and service, efficiency and excellent cost effectiveness. 

Mature Technology in Functional design

With Stetter truck mixers of the C and N version, the time spent on filling, discharging and cleaning is reduced to a minimum,thus you save time and money. Stetter truck mixers are available with mechanical or electronic control unit. Reliable drive components guarantee smooth operation. The truck mixers are available with a nominal volume of 6 to 10 m3   with slave engine or PTO driven.High Loading volume thanks to high water line Optimum drive characteristics thanks to a low center of gravity of the mixer Wear-resistant plates in feed hopper, discharge shell and swivel chute 5 mm mixing spirals in the main wear zones Stetter T-protect wear protection (30 x 8 mm) on the mixing spirals 

Trailer Line

Truck mixer body and semi-trailer have been optimally coordinated to form  compact units guaranteeing a high loading volume, high payloads and optimum driving characteristics thanks to a low center of gravity. Stetter truck mixers of the Trailer Line are built in modular construction and can therefore be optimally adapted to the individual tractor unit. The semi-trailers are available as 2 or 3 axle versions with 9 or 10 tons technically permissible axle loads. They are state of the ar t and have features such as axles  retarded by disc-brakes and ABS, EBS  system, air suspension. Road stability system (RSS) upon request.

The truck mixers are available with a nominal volume of 10 m3

Wherever concrete is produced and moved, SCHWING Stetter products are employed. Stetter Self Loading mixer is the result of experience gained over decades accompanied by permanent advancement and optimisation. Stetter Self Loading mixer is off highway rough terrain machine which can be operated by one person. The machine comes with electronic weigh batching and has a typical concrete output of 12 to 14 m3 / hr.

Special Feature
Engine
cylinder, water cooled, turbo-charged after cooler diesel engine - 80.9kw @ 2500 rpm.
Shovel
Hydraulic Cylinders activate 600L capacity loading Shovel. Single joystick control for easy loading and quick unloading shovel Gate operations.
Transmission
4 Wheel Drive, 4 Speed automotive type Hydrostatic transmission. Electro- hydraulic control for “slow”& “ fast ” speeds and “Inching operation”.
Drum
Hydrostatic Drum Drive with high rotation for homogenous mix, drum lift and slew for discharge concrete all around the machine on any terrain.
E-Weigh Batching
The different aggregate, sand, cement can be weighed accurately by the electronic weigh batching system
Ergonomic Controls
Ease of  operation  by conveniently  located  Electronic/ Hydraulic Switches, each for Travel, Gear Shift and Drum rotation. Hand lever provided for Drum Lift and Drum Slewing, Joy Stick provided for Shovel Arm Lift, Shovel tilt and Shovel Gate operation.
Gradeability
High level of gradeability to make tough environment look easy

Wherever concrete is produced and moved, SCHWING Stetter products are employed. Stetter Self Loading mixer is the result of experience gained over decades accompanied by permanent advancement and optimization. Stetter Self Loading mixer is off highway rough terrain machine which can be operated by one person. The machine comes with electronic weigh batching and has a typical concrete output of 12 to 14 m3 / hr.

Special Feature

Engine

cylinder, water cooled, turbo-charged after cooler diesel engine - 80.9kw @ 2500 rpm.

Shovel

Hydraulic Cylinders activate 600L capacity loading Shovel. Single joystick control for easy loading and quick unloading shovel Gate operations.

Transmission

4 Wheel Drive, 4 Speed automotive type Hydrostatic transmission. Electro- hydraulic control for “slow”& “ fast ” speeds and “Inching operation”.

Drum

Hydrostatic Drum Drive with high rotation for homogenous mix, drum lift and slew for discharge concrete all around the machine on any terrain.

E-Weigh Batching 

The different aggregate, sand, cement can be weighed accurately by the electronic weigh batching system

CP 18 - Mobile Batching Plant mounted on rigid truck

- Delivery of concrete to Concrete pump

- Electronic weighing of all components including water

- Three phase operation

- Microprocessor control

- Requires only one truck

- Transportable shipping dimensions

- No foundation required

Minimum assembly time

Few components to assemble at site makes the plant ready at minimum time frame.

Electronic weighing of all components including water

As a standard feature of our batching plants, all materials are weighed and added in the mixer.

STETTER CONCRETE RECYCLING PLANT (ECOLOGICAL OBLIGATION ECONOMICAL SOLUTION)

Concern for our environment, guidelines from legal authorities and above all, increased awareness of costs are the main reasons for worldwide efforts to solve the concrete industry's disposal and recycling problems. Profiting from extensive experience gained with sieve/cyclone separation systems, Stetter had already developed and implemented the concrete recycling plant by 1976.

Since then, our systems have proved to be reliable, economical and highly wear-resistant. Our permanent development efforts have made the Stetter concrete recycling plant an exceptionally strong product. We now offer two different sizes – from 12m3 /h to a maximum of 20m3 /h concrete recycling.

Circular Distributors – RVH 18 :

RVH18 is a concrete distributor with DN 125 pipeline and bends with SCHWING interchangeable pipe couplings. This distributor is with  3-section hydraulic boom, has four self-supporting legs, foldable to make it within transport dimensions. The lightweight design of pedestal and split boom design enables easy lifting, keeping control of assembly weight in minimum.

RVH18 boom can reach  18 meters, with 3m concrete Hose fixed at the end. The leg can be placed on floor or barge or can be fixed in slip-form base.

The RVH18 is provided with a sophisticated remote control system with electric motor power pack. The movements of the boom can be controlled precisely. The counter weight for all operation with power pack isresting on a slewing base column.Suitable safety devices are provided to ensure accident-free and safe operation of the stationary boom.

RVH18 will enhance the mechanized concrete pouring and can avoid the cumbersome process of laying the pipelines. This can speed up the concrete pours with reduced manpower.

SCHWING Rock Valve

Manufactured by SCHWING Stetter India in jointly with SCHWING engineers from Germany. The patented RL Rock Valve is the result of years of research and experience in concrete and is universally acknowledged to be the best concreting valve.

The Schwing Rock valve has proven itself over many years and in countless applications to be the epitome of economy in the world of concrete valves. The rock valve is patented by Schwing and it powers majority of pumps manufactured by Schwing.

The valve system has several advantages which has made it as a favorite of contractors worldwide. The Rock is robust and easy to service. It is subject to natural wear when pumping concrete and can then be rebuilt with hard-face welding which makes it multi-economical. 

Pumping Solutions for Waste Water Treatment Plants

 Greater reliability and efficiency with SCHWING sludge pump systems

Cities, regions and many businesses worldwide employ Waste Water Treatment Plants (WWTP) for the purification of their waste water, thereby making an active contribution to the protection of the environment. But the reliability of the Treatment Plant greatly affects the operational safety and efficiency of up- and downstream systems.

Generally, pumping the accruing sludge is a fundamental process in the operation of the plant and it is mainly focused to be a safe and reliable operation. Thereby, high demands on the machines engaged.

Thus, for decades plant operators have put their trust in SCHWING sludge pump systems (KSP) for pumping sludge. By full-filling their trust we have manufactured sludge pump systems with operational safety of the WWTP, and with low-wear design to keep maintenance costs as low as possible.

SCHWING is one of the leading manufacturers of sludge pumps and provides turnkey solutions for the transport and storage of sludges as well as materials with a high solids content. A detailed customer-oriented project planning and an effective design go hand in hand with a thorough consultation that rounds off the full scope of the competent SCHWING Team. 

For the optimum results, SCHWING relies on the in-house production of all major components such as piston pumps, electric& control systems, silos, continuous dosing and mixing devices, double screw conveyors, pipelines, and accessories. You can rely on SCHWING to support its customer long after & delivery and start-up. Our after sales care includes Training and Service for all your project needs.

• High-performance design
• Reliable and safe
• Low owning and operating costs
• Low maintenance costs
   

Description / Specification of Wheel Loader

We are involved in offering a wide range of Wheel Loader to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Wheel Loader. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Schwing Stetter is prominent in manufacturing cold milling machines with full hydraulic driving design attributes. The product is especially suitable for the maintenance and construction of city road and grade one or two highway. XM1003 series of the milling machine is our company first ideal model upgraded with four-wheel drive, small size, and large milling depth.

These cold milling machines are used for the fast, efficient removal of asphalt and for constructing roads and concrete pavements. In doing so, they create an extraordinary construction of new surface courses of uniform layer. With that, milling these individual pavement layers allows the material to be reclaimed in a particular process and is separated into the different mix types.

Features

Schwing Stetter offers a comprehensive range of products to cater various multitudes of products and solutions to meet the different market-specific requirements of the construction. Schwing Stetter’s high level of customer-driven engineering expertise guarantees innovations in every product which meets all market demands.

Schwing Stetter supply products that are economically suitable and stands as the best solution not only to road widths, maximum transport weights but also for seasonal climates and infrastructure.

The Horizontal Directional Drilling of Schwing Stetter comes with two different models i.e. HDD-XZ320D and HDD-XZ200 each with large and small sizes. These drilling machines are superior in performance and are economic while comparing the other equipment used. They account for the best steerable trenchless method in installing various underground cables, pipes like oil and water lines etc. with minimal impact on the surrounding areas. They are environmentally safe, provide less traffic disruption and consume low completion time for installation.

Schwing Stetter manufacture and supplies this equipment at a very low capital compared to other costlier methods used in drilling. They fabricate the machine with best innovative features that focus on reducing the manual workload with secure operational measures. Whether it is performance preference or operational characteristics Schwing Stetter stands as the best choice always.